Olympus VISERA ELITE CLV-S190, Инструкция по эксплуатации

Страница: 16 / 112

10
Important Information — Please Read Before Use
CLV-S190 INSTRUCTION MANUAL
CAUTION
• Do not leave the examination lamp ON when an endoscope is connected to the
light source. The examination light reaches the maximum intensity and the
endoscope’s distal end becomes hot. In addition, smoke may also be produced if
the debris attached to the distal end is heated.
• If the emergency lamp, instead of the examination lamp, lights up frequently when
pressing the lamp button to light the examination lamp, this instrument may have a
malfunction.
Return the instrument for repair, following Section 8.3, “Returning the light source
for repair”.
• Avoid using the light source in a dusty environment. This may damage the light
source.
• Do not position a medical device so that it is difficult to disconnect it from the wall
mains outlet.
NOTE
As defined by the international safety standard (IEC 60601-1), medical electrical
equipment is classified into the following types: TYPE CF applied part (the
instrument can safely be applied to any part of the body, including the heart), and
TYPE B/BF applied part (the instrument can safely be applied to any organ except
the heart). The part of the body that an endoscope or electrosurgical accessory can
safely be applied to depends on the classification of the equipment to which the
instruments are connected. Before beginning the procedure, check the current
leakage classification type of each instrument to be used for the procedure.
Classification types are clearly specified in the instruments’ instruction manuals.
Symbol Classification
TYPE CF applied part
TYPE BF applied part
TYPE B applied part