Olympia MILLENNIUM H, Руководство пользователя

Страница: 93 / 113

The Ultimate Ice Resurfacer 81
MILLENNIUM
H
8 CLEANING AND MAINTENANCE
8.1 Cleaning and Maintenance Safety Instructions
To perform the maintenance program, park the OLYMPIA Millennium H in an area that the
snow dump can safely be fully raised with the conditioner in the fully UP position and shift
the gear lever to the park position (P).
Fully raise the snow dump tank and install the safety support bars.
Turn off the ice resurfacer.
Before starting any maintenance jobs, remove the ignition key and keep it on your person.
Put up a notice at the dashboard that says: DO NOT SWITCH ON! WORK IN PROGRESS IN THE
DANGER ZONE!
Dismount using the three-point procedure.
When working on any of the other hydraulically operated components of the OLYMPIA, also
secure them with safety bolts or props, so that a hazardous situation does not arise in the
event of a component failure. Whenever working on the conditioner it is recommended
that blocks be placed under it to prevent any possible injuries.
Maintenance and repair work must only be done by duly trained personnel. Specialists are
needed for some jobs (e.g. electricians, hydraulics technicians, etc.).
Before starting the work, the OLYMPIA Millennium H must also be secured with wheel chocks
to prevent it from rolling away. The red/white plastic chains must be clearly visible at the
sides of the machine. It is imperative that the wheel chocks are removed again before putting
the OLYMPIA back into operation (the red/white plastic chains serve as a reminder).