Olympia MILLENNIUM H, Руководство пользователя

Страница: 106 / 113

The Ultimate Ice Resurfacer 94
MILLENNIUM
H
If OLYMPIA Millennium H will move in one direction only
Check to see if the pump coils are both functioning. This can be done by switching the
connections over to see if the machine changes the direction it is operating. If the problem
follows a specific coil, change that coil immediately.
Alternatively, you can install gauges at X1, X2 on the pump and with the brakes left engaged,
give the foot pedal partial half stroke in forward and reverse and record the readings.
If no pressure at X1, X2 and you are certain of an input signal, the control valve should be
changed by a qualified technician.
Machine driving slow or with reduced power
Confirm the charge pressure, temperatures, sound levels and hours of service and communicate
these and any other abnormalities to the machine manufacturer
If the OLYMPIA Millennium H is not driving straight
The OLYMPIA Millennium H utilizes a single pump that divides flow evenly between left side
and right side during straight line driving and self-adjusts when cornering. A problem with any
one of the motors would likely result in a tendency to drift offline with a simultaneous rise in
operating temperature at the suspect motor and the oil reservoir.
Check the temperatures and compare them to your baseline measurements. The most probable
issue will be on whichever side the machine is drifting toward. (i.e. if the machine drifts right,
check the right side motors first.
Also check the function of each of the bypass valves in the traction block