Olympia MILLENNIUM H, Руководство пользователя

Страница: 27 / 113

The Ultimate Ice Resurfacer 15
MILLENNIUM
H
1.11 Fuel Safety
If your OLYMPIA H is powered by LPG (propane) ensure you take the proper precautions when
changing the tanks.
Always use all of the required PPE (personal protective equipment), neoprene gloves, safety
goggles, long sleeve shirt, long pants, and steel toed work boots.
Always change the tanks outside or in a well ventilated area.
Always lift the tank with your knees, aluminium tanks weight approximately 53 lbs. when full
of fuel.
Before removing the tank coupler from the tank turn off the service valve, then start the
engine and run the OLYMPIA H completely out of fuel, this will ensure the supply line is empty
and minimize the chance of fuel leaking out of the tank coupler during the removal process.
Once the engine has run out of fuel, turn off the engine ignition switch, get down from the
OLYMPIA H using the three point contact dismount procedure.
While wearing your PPE, disconnect the empty fuel cylinder by removing the supply line (turn
the tank coupler counter clockwise), then unfasten the two tank straps, carefully lift the
empty tank off of the OLYMPIA H and place it in the secured propane tank storage compartment
at your arena.
Perform a visual check of the full tank you want to install on the OLYMPIA H for any damage
or distortion, check to make sure both o rings are in place inside the service valve, visually
inspect the tank coupler checking for any foreign material, ie, o rings or dirt.
Safety note: Never push the check valve pins on the tank coupler as any residual propane could
be released from the propane hose and possibly cause injury.
Install full propane tank on the OLYMPIA H, turn tank to proper position, and securely fasten
tank straps.