Olympia MILLENNIUM H, Руководство пользователя

Страница: 86 / 113

The Ultimate Ice Resurfacer 74
MILLENNIUM
H
The wash water system sprays cold water onto the ice from the sides of the conditioner behind
the cutting blade in front of the squeegee and between the runners.
The cold water flushes the snow and debris out of the skate cuts in the ice. The debris is floated
up to the top of the slush while the snow is compacted into the skate cuts by the squeegee. The
remaining slush snow and debris is augured into the center of the conditioner and then lifted by
the elevator auger upward into the filter basket and then into the snow bin.
Ice Making Procedure
1. Fill the tank with hot water through the fill pipe located on the driver’s side.
With the Ice Making Water tank filled with enough hot water to do a complete resurfacing plus
10%. Now drive onto the ice surface and lower the conditioner all the way to the ice surface.
Turn on the ice making water by opening the ice making water valve located at the right of the
operator. Adjust the ice making water valve to match the speed you are driving the OLYMPIA
Millennium H. Usually half open for the first lap and then increased to full open once you have
moved away from the boards.
We recommend you maintain a constant wheel speed throughout the resurfacing to ensure an
even amount of water dispersed onto the ice thus preventing ice buildup particularly in the
corners.
After each resurfacing it is recommended to drain any excess water left in the tank. This will
reduce scale build up inside the ice making water tank.