Olympia MILLENNIUM H, Руководство пользователя

Страница: 82 / 113

The Ultimate Ice Resurfacer 70
MILLENNIUM
H
7.2 Starting and Driving
The OLYMPIA H, has many built in safe guards to keep it safe. Therefore there is a proper
sequence to start the OLYMPIA that must be adhered to.
After mounting the drivers platform using the three point contact procedure. Insert the key
into the ignition switch, make sure the gear selector is in the park position, turn the key to the
start position and hold until the engine starts.
NOTE: If the key is released before the engine starts you must return it to the off position
before trying to start the engine a second time. As well if the accelerator pedal is pushed
down the engine will stop cranking.
Once the engine is started, before selecting which ever direction you wish to move, visually
check for any persons or objects that may be in the way, and clear the area before moving.
Next adjust the engines RPM by turning the RPM control clockwise until the engine reaches
approximately 1200 RPM.
Sound the horn to let anyone in the area know you are about to move the OLYMPIA H.
Now slowly push down on the accelerator pedal, the OLYMPIA will start to move, the further
you push on the accelerator pedal the faster the OLYMPIA move.
SAFETY NOTE: The OLYMPIA H is designed with computer controlled hydraulic dynamic
braking, this means that once the OLYMPIA H is in motion, by releasing pressure from the
accelerator pedal the OLYMPIA H will automatically at a controlled rate slow to a stop if the
pedal is completely released.
To change direction in movement, first come to a complete stop then shift the gear selector
to N (neutral) and then into the other direction, then slowly depress the accelerator pedal to
start the OLYMPIA H moving in the desired direction.
Once you are on the ice surface, adjust the engine RPM control up to between 1600 and 1800
RPM. And commence with resurfacing the ice.