Olympia MILLENNIUM H Скачать руководство пользователя страница 21

Страница: 21 / 113

The Ultimate Ice Resurfacer

MILLENNIUM

1.7 Obligations of the User

The User must ensure that…

• The ice resurfacer is only used in the proper manner,

• The ice resurfacer is only operated when it is in perfect working order,

• The integrated safety devices are regularly maintained and checked for proper function,

• The operating manual is supplemented with all generally applicable, statutory and other

binding accident prevention and environmental protection regulations, and that these are
complied with!

•

Personal protection gear/clothing is provided and is worn (e.g. protective gloves, warm
clothing, safety helmet and, if necessary, ear muffs, steel toed safety boots, and also non-
slip footwear (for walking on the ice surface).

• The operating manual is supplemented with facility-internal instructions, e.g. supervision

and reporting duties to take account of facility-specific particulars, such as work

organization, operational procedures, employed personnel, etc.

• It is checked, regularly, that the personnel are working in a safe and hazard-conscious

manner and are adhering to the instructions given in this operating manual!

Содержание MILLENNIUM H


















































































































Результаты поиска

Содержание MILLENNIUM H

Отзывы:

Бренды по названию

Популярные бренды

Olympia MILLENNIUM H, Руководство пользователя

Результаты поиска

Содержание MILLENNIUM H

Отзывы:

Бренды по названию

Популярные бренды