manualshive.com logo in svg

Olympia MILLENNIUM H, Руководство пользователя

Поделиться
Скачать
Olympia MILLENNIUM H Скачать руководство пользователя страница 14

The Ultimate Ice Resurfacer

2

MILLENNIUM

 

H

Note:

We reserve the right to make changes in content. Resurfice Corp. accepts no liability for any 

errors, omissions and or misinterpretations of the material in this documentation. Liability for 
indirect damages arising from the supply and use of this documentation is excluded, unless 
required by law.

Copyright in acc. with DIN 34:

 

This manual must not be copied or passed on to third parties, nor must its contents be used by, 
nor imparted to third parties without express permission. 

Failure to comply will result in claim for damages. All rights with regard to the granting of a 
patent or design registration reserved.

Resurfice Corp.

 

© 2012  Resurfice Corp.

 

25 Oriole Pkwy E, Elmira, Ontario Canada  N3B 3A9

All rights reserved. Reproduction, whether in whole or in part, requires the authorization of the 

company Resurfice Corp.

Содержание MILLENNIUM H


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды