Olympia MILLENNIUM H, Руководство пользователя

Страница: 111 / 113

The Ultimate Ice Resurfacer
MILLENNIUM
H
□
Inspect the condition of the serpentine belt for proper placement and damage.
□
Inspect the hydraulic tank sight gauge on the right hand side for proper level and colour of liquid,( 2/3 - 3/4 full and
bright red in colour).
□
Inspect the engine oil for proper level using the dipstick.
□
Inspect the radiator fluid for proper fill level.
□
Inspect all radiator coolant lines for leaks and wear.
□
Inspect all of the engines electrical connections on the right hand side.
□
Inspect the engine for any oil or coolant leaks.
□
Inspect the steering linkage Properly secure the right hand side snow bin support in the upright position.
□
Inspect the flood water tank over-flow hoses to ensure proper placement.
□
Inspect all 4 of the flood water tanks clamps to ensure proper placement.
□
Inspect the flood water tank drain valve, making sure it opens and closes freely.
□
Close the flood water tank drain valve.
□
Inspect the right hand side of the body for damage.
□
Inspect the right hand side of the valve block for leaks. All adjuster nuts on the valve block must be tight.
□
Inspect all hoses in the area for leaks, damage and wear
□
nspect the rear right tire and rim for damage.
□
nspect the studs to make sure they are tight and secure in the tire.
□
Inspect the lug nuts to ensure tightness and tire pressure for correct inflation.
□
Inspect the wash water tank drain valve, making sure it opens and closes freely.
□
Close the wash water drain valve.
□
Remove and inspect the wash water basket and make sure it is free of dirt and debris .
□
Moving to back of the OLYMPIA, unstrap and inspect the LPG tanks for fuel.
□
Always make sure you have one full tank on board.
□
When replacing a tank, inspect the tank for damage as well as the o-ring in the tank connection for proper placement.
ALWAYS WEAR YOUR PPE WHEN CHANGING A LPG TANK!
□
Dress the straps of the tanks to ensure the tanks are secure
□
Turn on both LPG tanks.
□
Check all LPG connections for leaks using soapy water.
□
When turning on LPG tanks make sure to turn them on slowly as to not trip the excess flow valve.
□
Run your hand on the bottom of the right hand side runner of the conditioner from BACK TO FRONT, check for burrs on
the runner and note the blade position. If there are burrs present use a flat file to remove them.