Olympia BS-468/A, Руководство пользователя

Страница: 6 / 62

6 921468007_09_010
2.2. Armed system indication
When the system is armed, then next to the clock, instead of the
Olympia electronics logo there is a lock symbol. Next to the lock
symbol we can see which sections are armed. In this example we
can see that the system is partially armed because only the C
section is armed. If the system was fully armed then the symbols
Α, Β, C would have been displayed. When the system is dis-
armed then the lock is removed and the Olympia electronics logo
is displayed.
2.3. Advanced operations
By pressing the " *

" key the display shows:
Using the up and down keys (keys 2 and 8), we can move the cur-
sor upward or downward. By using the " *

" key we can achieve
the required selection. By using the " #
ESC
" we can go one level
backwards or cancel a selection.
Selecting
«BYPASS ZONES» we see:
We can select which zones are disabled (will not be armed) during
the next arming of the system. For example, if we enter 04 and then
immediately 07, this means that the next time the system is armed,
zones 4 and 7 will be disabled. If a zone blinks, this means that it is
preventing the system from arming. If it is blackened then this
means that it is disabled. If it is blinking and blackened then this
means that it is disabled but would prevent the panel from arming if
it was not disabled.
Selecting
«BYPASS W/LESS ZONES» we see:
The same applies for wireless zones. The only difference is that the
zone numbers are 25 - 56 (wireless zones).
For the selection
«MASTER OR TECH MENU» you will find information in the section "Main User
Menu" in a following page.
MENU
BYPASS ZONES
BYPASS W/LESS ZONES
MASTER OR TECH MENU
WIRED ZONE CONDITION
WLESS ZONE CONDITION
LAST ALARMS
ALL EVENTS
MANUAL OUTPUTS CHECK
INFORMATION
____BYPASS ZONES ____
04 07
_____________________
CHOOSE FROM 01-24
BYPASS: --
C
____ BYPASS ZONES____
29 31
_____________________
BYPASS: -- (25-56)