30
921468007_09_010
number (it is filled with dashes) and the cursor is moved to the first digit.
In order keys
‘Α’, ‘Β’ and ‘C’ to be accepted, they must be pressed for at least 1 second.
«PSTN»
«INCOM. CALL REACTION».
This setting permits us to adjust how the PSTN dialer acts during an
incoming call. The options available are
«DO NOT ANSWER» or «
AFTER 15 SEC.
» as well as after 10,15,20,25,30,or 40 seconds.
There is also an option to respond after a second call has been re-
ceived. It is obvious that if the first option is selected then the PSTN
dialler cannot accept remote commands for telephone calls. Also,
regarding the other selections, the call will be answered.
«PSTN»
«TELEPHONE LINE CHECK»
This option tests if there is proper line signal. If not, a "LINE NOT FOUND" fault is produced.
«PSTN»
« ALARM RECEIV. CENTRE»
ARC Status. We can select if the ARC(Alarm Receive Center) is
activated or deactivated.
ARC PHONE NUMBER. We can enter the telephone number of
the ARC.
PANEL ID (0-9 & B-F) we can enter the ID of the alarm panel,
using the numbers 0 to 9 and the letters from B to F.
ATTENTION!! When the BS-477 wireless keypad is used, if the
user does not type a digit within 10 seconds, the keypad returns to the menu.
EVENTS NOTIFICATION. We can select which events the ARC will be informed by
COMMUNICATION TEST. We can adjust the panel not to perform a communication test with the
ARC or to perform a test every 4, 8 or 24 hours.
COMM. TEST (WAIT). We can manually establish a communication between the panel and the
ARC and see the results in a few seconds.
For detailed information regarding the PSTN card BS-465, please refer to the user manual of BS-465.
INCOM. CALL REACTION
DO NOT ANSWER
AFTER 5 SEC
AFTER 10 SEC
AFTER 15 SEC
AFTER 20 SEC
AFTER 25 SEC
AFTER 30 SEC
AFTER 40 SEC
AFTER SECOND CALL
ALARM RECEIV. CENTER
ARC STATUS
ARC PHONE NUMBER
PANEL ID (0-9 & B-F)
EVENTS NOTIFICATION
COMMUNICATION CHECK
COMM. TEST (WAIT)
Содержание BS-468/A
Страница 1: ...BURGLAR ALARM PANEL BS 468 A...