21
a
b
1
2
Figure 23. How to change the CO2 Setpoint (a
–
b).
1
2
a
b
Figure 24. How to change the O2 Setpoint (a
–
b).
The Setpoint regulation page will appear as in the Figure 23 b and Figure 24 b. You can modify the Setpoint
by clicking on
+ and
–
. Once you have input the new CO2
or O2 Setpoint, press
Set
(2 in Figure 23 b and 2 Figure
24 b) to save or
Cancel
to undo.
Tip
►
After any change in the Setpoint value, CO2-O2-UNIT-BL [0-10; 0-1] enters into a transient regime, the
Status Indicator and the TOP LED (see Figure 25) turn yellow (see paragraph 9.1.2). During the transient
regime, CO2-O2-UNIT-BL [0-10; 0-1] will not trigger on alarm.
