Okolab CO2-O2-UNIT-BL Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 61

background image

57

WARRANTY

Okolab S

.r.l. warrants “CO2

-O2-UNIT-BL [0-10; 0-1]

” to be free of defects in materials and workmanship

for a period of one year starting from invoice date. If the unit malfunctions, it must be returned to the factory for
evaluation. If the equipment has to be returned to the factory, please ensure that is carefully and properly packed.
Okolab S.r.l. accepts no responsibility for damage due to unsatisfactory packing. If the unit is found to be defective,
it will be repaired or replaced at no charge. This warranty does not apply to defects resulting from any actions of
the purchaser. Components which wear are not warranted. Okolab S.r.l. neither assumes responsibility for any
omissions or errors nor assumes liability for any damage that may results from improper use of its products in
accordance with information provided by Okolab S.r.l. Okolab S.r.l. warrants only the parts manufactured by
Okolab S.r.l to be free of defects. Okolab S.r.l. makes no other warranties or representations of any kind whatsoever,
express or implied, except that of title, and all implied warranties including any warranty of merchantability and
fitness for a particular purpose are hereby disclaimed. LIMITATION OF LIABILITY: the total liability of Okolab S.r.l.
shall not exceed the purchase price of the component upon which liability is based. In NO event shall Okolab S.r.l.
be liable for consequential, incidental or special damage.

IST2180_REV01

SV 2.2.5

«
...
59
60
61

Содержание CO2-O2-UNIT-BL






























































Отзывы:

Нет отзывов

Похожие инструкции для CO2-O2-UNIT-BL

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 10

Бренд: IFM Страницы: 49

Бренд: Paradox Страницы: 32

Бренд: KaRo Страницы: 12

Бренд: V2 Страницы: 48

Clip Studio TABMATE

Бренд: CELSYS Страницы: 2

MIMIC HRNDWHEELS

Бренд: MRMC Страницы: 20

Бренд: Digiplex Страницы: 48

Бренд: Moog Страницы: 15

Бренд: Parallax Страницы: 3

Бренд: FUHR Страницы: 20

XDOM TAKE 6 IR/RF - PRODUCTSHEET

Бренд: Ebode Страницы: 88

Бренд: AccessPRO Страницы: 2

Бренд: Baby Jogger Страницы: 8

Бренд: Transient Modules Страницы: 5

Бренд: Brooks Страницы: 68

Бренд: Radio Shack Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды