31
a
b
Figure 44. Start Zero calibration (a
–
b)
The Zero Calibration will start after pressing “
OK
” and the progress bar will appear (see
a
b
Figure 45. Zero calibration running (a
–
b)
9.2.1.2.3
Factory Reset
If you are unsure about the calibration you have just performed or if for any reason you want to reset to
the factory calibration, press on
Factory Reset
icon
(see Figure 46 a). A pop-up message appears (see Figure
46 b). Press
Reset
to proceed or
Cancel
to undo.
a
b
Figure 46. Sensor calibration factory reset (a
–
b).
9.2.1.3
Flowrates
Press the Flowrates icon to check how many liters per minute of N2, CO2
and Air the system is
consuming (see Figure 47 a). Additionally, this panel allows you to select the flowrate of the gas mixture you want
