- 9 -
General precautions
WARNING
Do not touch the safety switch inside the machine. High voltage may occur
and electric shock may be caused. In addition, gears can rotate, which may
result in personal injury.
Do not use any inflammable spray near the machine. Doing so may cause a
fire since there are high-temperature parts inside the machine.
Disconnect the power plug from the outlet and contact your dealer if the
cover becomes abnormally hot, emits smoke, gives off an odor, or makes an
abnormal noise.
Failure to do so may cause a fire.
Disconnect the power plug from the outlet and contact your dealer if water or
other liquid gets into the machine.
Failure to do so may cause a fire.
If paper clips or other foreign objects enter the machine, disconnect the power
plug from the outlet and remove the foreign objects if any.
Failure to do so may cause electric shock, fire or injury.
Do not disassemble the machine or perform any operations other than those
specified in the User's Manual.
Failure to do so may cause electric shock, fire or injury.
Disconnect the power plug from the outlet and contact your dealer if the
machine is dropped or the cover is damaged.
Failure to do so may cause electric shock, fire or injury.
Periodically disconnect the power plug from the outlet and clean the base of
the prongs and between the prongs.
Leaving the power plug inside the outlet for a long period of time may cause a
fire due to short circuit caused by collection of dust at the base of the prongs.
Do not clean up spilled toner using an electric vacuum cleaner. When spilled
toner is cleaned up using an electric vacuum cleaner, fire may be caused due
to sparks from electrical contacts.
If toner is spilled on the floor, wipe the toner up carefully using a damp cloth
to prevent toner scattering.
Do not insert objects into the air vents.
Failure to do so may cause electric shock, fire or injury.
Содержание PRO330S
