Oki PRO330S, Руководство пользователя

Страница: 106 / 280

- 106 -
• When cutting the front edge of the roll paper with scissors or the like, cut it perpendicular to the paper feed
direction. If the front edge of paper is not flat, the roll paper may not be pulled in.
• If a barcode is printed on the roll paper, be careful not to cut the barcode part.
• Roll paper with dented corners cannot be used.
• If you want to use the optional roll paper holder, refer to the Label Printing Manual.
1
Move the upper and lower paper sensors to the appropriate positions.
• For details, refer to "Adjusting the position of paper sensor" (Page 100) .
2
Place your finger under the gray lever on the left side of the back of the
machine and push it up to open the feeder cover.
3
Lift the paper guide lever on the left side of the machine to unlock it.
4
Aligning the paper guide with the width of the paper.
• Adjust it properly until there is no gap between the paper guide and the paper.