- 76 -
The shaded settings are the factory default settings.
Item
Setting value
Description
NETWORK SCALE
NORMAL
SMALL
NORMAL: It works efficiently even when connected to a
hub with a spanning tree function. However, when 2 or
3 computers are connected via a small LAN, the startup
time for the machine will become longer.
SMALL SCALE: It can accommodate 2 or 3 computers
connected via a small LAN or a large LAN setup. When
it is connected to a hub with a spanning tree function,
it may not work efficiently.
HUB LINK SETTING
AUTO NEGOTIATE
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
Sets the connection method to the hub.
AUTO: Automatically selects a connection method for
each hub and attempts to connect.
Other items: Attempts to connect to the hub only with
the set connection method.
FACTORY DEFAULTS
EXECUTE
Restores the network menu to the factory default
settings.
USB SETUP USB
ENABLE
DISABLE
Enables/Disables the USB interface.
SPEED
480 Mbps
12 Mbps
Sets the maximum baud rate using a USB interface.
SOFT RESET
ENABLE
DISABLE
Enables/Disables the Soft Reset command.
SERIAL NUMBER
ENABLE
DISABLE
Enables/Disables the USB serial number.
The USB serial number is used to identify the USB
device connected to the PC.
CONNECTED HOST
NORMAL
SPECIFIC
SPECIFIC: Enables printing from a specific computer
connected via USB.
SETUP
COPIES
1
-
999
Sets the number of copies.
When printing information related to the machine, the
copy number setting is disabled.
MEDIA CHECK
ENABLE
DISABLE
Set whether or not to check whether the paper size of
the print data matches that of the media loaded in the
machine.
ENABLE: Detects a paper size error when the actual
paper is 17.5 mm shorter than the paper length.
DISABLE: Does not detect a paper size error.
EDGE TO EDGE
ON
OFF
Sets whether or not toexpand the printing area.
ON: Leave a margin (unprintable area) of approx.
2 mm. For paper with a paper width of 86 mm, the
margin is 3 mm.
OFF: Leave a margin of approx. 4.2 mm.
RESOLUTION
600 DPI
1200 DPI
Sets the printing resolution.
TONER SAVE
OFF
LOW
MIDDLE
HIGH
Sets the toner save level.
When OFF is set, toner usage will not be saved.
ORIENTATION
PORTRAIT
LANDSCAPE
Sets the orientation.
EDIT SIZE
FEEDER SIZE
CUSTOM
Sets the area to print when the paper size is not
specified in the print data.
FEEDER SIZE: This value is set from [MENUS] - [FEEDER
SETUP] - [X DIMENSION]/[Y DIMENSION].
CUSTOM: This value is set from [PRINT SETUP] -
[X DIMENSION]/[Y DIMENSION].
X DIMENSION
25.0 mm
-
74.0 mm
-
86.0 mm
Sets the default custom paper width.
Paper width refers to the length of the side
perpendicular to the paper travel direction.
Y DIMENSION
53.0 mm
-
210.0 mm
-
551.0 mm
Sets the default custom paper length.
Paper length refers to the length of the side in the
same direction as the paper travel direction.
BARCODE ADJUST
OFF
ON 1
ON 2
Adjusts the line width of the barcode.
ON 1: Makes the lines 1 dot finer than the standard.
ON 2: Makes the lines 2 dot finer than the standard.
Содержание PRO330S
