manualshive.com logo in svg

Oki PRO330S, Руководство пользователя

Поделиться
Скачать
Oki PRO330S Скачать руководство пользователя страница 146

- 146 -

Replacing the toner cartridge

When "ORDER TONER" is displayed on the display of the operator panel, prepare a replacement 
toner cartridge.
When the message "REPLACE TONER" is displayed and printing stops, replace the toner 
cartridge with a new one.
The guideline for replacing the toner cartridge is approximately 5,000 sheets when printing 

25.4 mm (1 inch) black square blocks on 216 mm x 58 mm paper.

• 

The printing quality will decline after the toner cartridge stays unpacked for one year or longer. Therefore, prepare 
a new toner cartridge.

• 

When you replace a toner cartridge/image drum in use, the toner usage will not be calculated accurately.

1 

Open the toner cartridge cover.

2 

Remove the toner cartridge.

WARNING

Otherwise burns may be caused.

Never throw a used toner cartridge in fire. The toner inside may scatter or even 

explode, thus resulting in burns.

• 

Lay a piece of paper underneath the removed toner cartridge since toner may spill from the bottom of the 
toner cartridge.

Содержание PRO330S

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды