Oki OKIFAX 5650, Руководство пользователя

Страница: 40 / 138

English
28
Telephone/Fax Auto Switch Mode [T/F]: When incoming calls are a
mixture of fax and telephone calls, your best choice is the Telephone/Fax
Auto SW mode. In this mode, your fax machine detects whether the
incoming call is a fax or voice call. When the call is from another fax
machine with CNG tones, your machine will switch to fax mode and
receive the message. When the call is a voice call, your fax machine will
ring like a telephone. If you do not answer, your fax machine will switch
back to fax mode to allow the calling party to manually send a fax.
Note 1: Only use this mode if the telephone is located close to your fax
machine. After the initial ring, the telephone falls silent, but the
fax machine continues ringing.
Note 2: If you receive calls from older fax machines, this mode will not
work reliably, as those machines do not transmit CNG tones. In
such cases the line is silent when you pick up the telephone. To
receive the fax, press the start key or enter a 2 digit remote
receive number using the telephone keypad. See “
16:REMOTE
RECEIVE” in “Programming” later in this User Guide.
Telephone Answering Device Mode [TAD]: Use this mode if you have
connected an answering machine to your fax machine. When a call is
received and is not answered, your answering machine activates and is
ready to send out your recorded outgoing message. At the same time, your
fax machine monitors the incoming call to check if the call is a fax or
voice call. If the incoming call is a fax call, your fax machine will receive
the fax and no voice message will be recorded on your answering
machine. If the incoming call is a voice call, then your fax machine will
not activate and the calling party will be able to leave a voice message on
your answering machine.
Note: In some countries, the Telephone Answering Device mode is
normally turned off. To have it turned on, contact your
supplier.
Memory Reception Mode [MEM]: Use this answering mode if you want
incoming faxes to be stored in the memory of your fax machine and not
immediately printed. To prevent any data received from being printed
while your fax machine is in Memory Reception Mode, you can program
a password into your fax machine. See “Creating Memory Password” in
“Programming” later in this user’s guide.
PC Receive Mode [PC]: Use this mode when your fax machine is
connected to your computer and you have the optional software installed
on your computer, which allows your fax machine to act as a fax modem.