- 208 -
9. Troubleshooting
Belt Unit not installed correctly. Re-set the Belt Unit. Error: 330
The belt unit is not properly installed. Remove and re-install the belt unit.
[COVER] Open. Error: 310
Indicated cover is open. Close the cover.
Error: 310 The output tray.
Power OFF/ON
Turn the machine off, and then back on.
If the same error occurs, contact your dealer.
Inspection is required.
Turn the machine off, and then back on.
If the same error occurs, contact your dealer.
Cancelling ...
The cancel button was pressed while copying. The copy job is being cancelled. Wait for a while.
Automatic document feeder (ADF) cover is open.
The ADF cover of the scanner is open. Close the cover.
Document jam has occurred. Open the automatic document feeder (ADF) cover on the
scanner to check.
Paper jammed in the ADF of the scanner.
Open the ADF cover and remove jammed paper.
Scanner lamp error check the lamp.
Light volume of the scanner is low. Contact your dealer.
Power OFF/ON Carriage Error <1>
An error has occurred on the carriage of the scanner. Turn the machine off, and then back on.
If the same error occurs, contact your dealer.
USB Memory Full
Scan To USB Memory was cancelled because the USB Memory is full.
Check the free space in the USB Memory.
Writing to USB memory failed.
The USB Memory is write-protected. Unlock the protection.
USB Memory disconnected.
The USB Memory was removed while performing Scan To USB Memory. Connect USB Memory and try again.
Connect to PC failed.
No destination computer was found for Scan to Computer. Make sure that your computer is turned on and
recordable.
To erase the message, press [Close].
Scan To Computer Problems (Advanced Manual)
Insufficient memory occurred during Rx.
Memory full error has occurred during fax reception. Ensure available memory.
Communication Error
An error has occurred during fax transmission or fax reception.
Telephone
The external phone is in use. Use the device after ending the call in progress.
File Transmission Error
An error such as a malfunction of the server or disconnection of a LAN cable has occurred while performing Scan To
shared folder.
Check the network connection.
To erase the message, press [Close].
Содержание MC573
