Replacing Consumable Items
- 167 -
M
aint
enanc
e
8
Replacement Procedure
Note
Do not expose the image drum unit to direct sunlight or
very bright interior light (approximately more than
1500lux). Even under the normal interior light, do not
leave it for more than 5 minutes.
1
Prepare the new fuser unit.
2
Turn off your machine.
Reference
"Turning Off Your Machine" (P. 19)
3
Open the scanner unit.
4
Press the top cover open button (1) and
open the top cover.
5
Pull the locking levers (2) on each side of
the fuser unit to unlock.
6
Hold the fuser unit handle (3) and lift the
fuser unit out of the machine.
7
Unpack the replacement fuser unit.
8
Remove the orange stopper (5) while
pressing the blue lever (4) of the fuser
unit in the direction of the arrow.
Note
Keep the orange stopper. It is necessary to transport
the machine.
9
Hold the fuser unit handle and place the
fuser unit into the machine.
10
Push the locking levers (6) on each side
of the fuser unit to lock.
11
Close the top cover.
12
Close the scanner unit.
Memo
If you dispose of a toner cartridge by necessity, put it in a
polyethylene bag or something and then dispose of it in
accordance with your municipality's ordinances or guidelines.
CAUTION
Possible to get
burned.
Since the fuser unit gets hot, carry out the
operation carefully, and when lifting it up you
must hold it by the handle. Do not try to hold it
whilst it is hot. Wait until it has cooled down and
then carry out the operation.
1
2
2
3
5
4
6
6
