Installing Your Machine
- 19 -
Se
tup
1
Turning On Your Machine
1
Check that the power switch is off <
O
>.
It is the status where the power is turned off.
2
Plug the AC cable into the AC power
socket of your machine.
3
Plug the AC cable into the electric socket.
4
Check that no documents are on the
document glass or ADF, and the ADF
cover is closed.
5
Press the <
|
> (on) side of the power
switch.
Note
Turn the power off, and when turning the power back on
again, push the power switch to the <
|
> side after waiting
for a few seconds.
Turning Off Your Machine
Be sure to follow the procedure below every time
you turn off the machine.
1
Press the <
SETTING
> key on the
operator panel.
2
Press the to select [
Shutdown
]and
press .
3
On the confirmation message, press the
or to select [
Yes
] and then
press .
OK
OK
