Oki CX 1145 MFP Скачать руководство пользователя страница 139

Страница: 139 / 341

139

5.USING THE EDITING FUNCTIONS

7.EDITING (Cont.)

Enter the values read in step 5 for the specified area, and then press
the [SET] button. Set 4 values in order.

• After the setting of 4 values is finished, the next edit area menu is displayed. Repeat steps 5 and 6 when you

specify other areas. Up to 4 areas can be specified on an original.

• To correct the value which has been set, press the [RESET] button. Pressing it once makes the highlighted

field move one position upward. Highlight the field in which you want to rectify the value, and then key in the
correct one.

Press the [ENTER] button after specifying the area.

Place the original with its face up on the
original glass.

• Set the original with its face up and bottom toward you and fit its

top left corner against that of the original glass to align it with the
original scales.

Do not place heavy objects (9 lb. or more) on the original glass and
do not press on it with force. Breaking the glass could injure you.

Specify the area. Read the following 4
values of the left and top scales.

X1:

Distance from the top left to the left edge of the

specified area

X2:

Distance from the top left to the right edge of the

specified area

Y1:

Distance from the top left to the upper edge of the

specified area

Y2:

Distance from the top left to the lower edge of the

specified area

• The marks of the original scale have a 2 mm (0.08") pitch.

Содержание CX 1145 MFP






















































































































































































































































































































































Результаты поиска

Содержание CX 1145 MFP

Отзывы:

Бренды по названию

Популярные бренды

Oki CX 1145 MFP, Руководство оператора по основным функциям

Результаты поиска

Содержание CX 1145 MFP

Отзывы:

Бренды по названию

Популярные бренды