Oki C710, Руководство по обслуживанию

Страница: 52 / 223

43856301TH Rev.3
51 /
Oki Data CONFIDENTIAL
3. Set up
(3)-5. Install the side cover.
(3)-6. Connect the power cord and printer cable to the printer, and turn the
power on.
Note!
If the message [SERVICE CALL031:FATAL ERROR] is displayed, please
reinstall the memory.
Screw
Top cover
Front cover
Side cover
Install the side cover.
Fix the side cover with the screw. (one
place)
Close the top cover and front cover.
Print the setting content with following the procedure in chapter 3.6.
Confirm the total memory capacity displayed in [Total Memory] of [System]
part.
Note! If total memory capacity displayed in [Total Memory] is incorrect,
please reinstall the memory.
(3)-7. Print the setting content and confirm if the optional memory is installed
properly.
(4) Install the built-in hard disk.
Note! Be careful that the font cannot be
downloaded.
There are 2 types of built-in hard disk as C710n options.
• Standard built-in hard disk (Type name: HDD-C1B)
It is a built-in hard disk added to the printer.
It is used under following conditions:
Authentication print, print job save, buffer print operate
Combination print error occurs when printing the whole file at once.
• Data protection kit-A1(Type name: DPK-A1)
Please refer to chapter 7.8.
One of the above hard disks could be installed.