Oki C710, Руководство по обслуживанию

Страница: 136 / 223

43856301TH Rev.3
135 /
Oki Data CONFIDENTIAL
7. Troubleshooting and repair procedure
Panel display
(The mark indicates no
message in the upper row.)
ON
LINE
lamp
Inspection
lamp
Details
Remedial
measure
***Flash Error
Varies Varies PU flash error (Error has occurred
during re-writing of the PU firmware.)
%PUFLASH% is described below.
PU
TRAY2
DUPLEX
−
Gathering print error
Press the ON LINE
button.
Varies On Indicates that the MOPY memory is
data full. This error is kept displayed
until the ON LINE key is pressed.
Reduce the
number of
pages that
are going to
be printed at
once.
Because print
restriction has been
set, the data is
deleted.
Press the ON LINE
button.
Varies On Notify user that the job is canceled
because the print permission is not
set. (Job Account related).
This error is kept displayed until the
ON LINE key is pressed.
• Set the user
ID of the job
account in the
printer driver.
• If the user ID
has been set
in the driver,
confirm the
user ID and
its setting
with the job
account
ministrator.
Because the log buffer
is full, the data is
deleted.
Press the ON LINE
button.
Varies On Notify user that the job is canceled
because the log buffer is full. (Job
Account related)
This error is kept displayed until the
ON LINE key is pressed.
Executeto
[Acquire
immediately]
on the server
PC of the
print job
accounting.
Panel display
(The mark indicates no
message in the upper row.)
ON
LINE
lamp
Inspection
lamp
Details
Remedial
measure
File system access
error <nnn>
Press the ON LINE
button.
Varies On Indicates that a file system error
other than the above-described file
system related status error, has
occurred.
The processing that does not used
the file system can be operated.
%FS_ERR%
=0 .... GENERAL ERROR
=1 .... VOLUME NOT AVAILABLE
=3 .... FILE NOT FOUND
=4 .....NO FREE FILE DESCRIPTORS
=5 .... INVALID NUMBER OF BYTES
=6 .... FILE ALREADY EXISTS
=7 .... ILLEGAL NAME
=8 .... CANT DEL ROOT-
=9 .... NOT FILE
=10 .. NOT DIRECTORY
=11 .. NOT SAME VOLUME
=12 .. READ ONLY
=13 .. ROOT DIR FULL
=14 .. DIR NOT EMPTY
=15 .. BAD DISK
=16 .. NO LABL
=17 .. INVALID PARAMETER
=18 .. NO CONTIG SPACE
=19 .. CANTCHANGE ROOT
=20 .. FD OBSOLETE
=21 .. DELETED
=22 .. NO BLOCK DEVICE
=23 .. BAD SEEK
=24 .. INTERNAL ERROR
=25 .. WRITE ONLY
Replace the
HDD. No
remedial
action is
required when
print such as
authentication
print is not
used.
The has received
invalid data.
Press the ON LINE
button.
Varies Varies Prompt user to press the ON LINE
switch to disappear the warning
because the printer has received an
invalid data.
This error is displayed when a printer
has received the unsupported PDL
command.
Press the ON
LINE switch.