43856301TH Rev.3
132 /
Oki Data CONFIDENTIAL
7. Troubleshooting and repair procedure
Panel display
(The mark indicates no
message in the upper row.)
ON
LINE
lamp
Inspection
lamp
Details
Remedial
measure
%COLOR% Image
drum is reaching near
life end.
Varies
On
(Off)
Indicates that the image drum
is reaching near life end. Print
can be continued until the image
drum reaches end of life. When
the menu has been set as follows:
ADMIN MENU [CONFIG MENU] –
[NEAR LIFE LED] = DISABLE, the
inspection LED is turned off.
%COLOR%
Y
M
C
K
−
Fuser is reaching near
life end.
Varies
On
(Off)
Indicates that the fuser is reaching
near life end. If the menu has been
set as follows: ADMIN MENU
"CONFIG MENU" – "NEAR LIFE
LED = DISABLE", the inspection
LED is turned off.
−
Belt is reaching near
life end.
Varies
On
(Off)
Indicates that the transfer belt is
reaching near life end. Because it is
warning only, print is not stopped. If
the menu has been set as follows:
ADMIN MENU "CONFIG MENU" –
"NEAR LIFE LED = DISABLE", the
inspection LED is turned off.
−
Replace the fuser.
Varies
On
Indicates that the fuser had reaching
end of life (warning). It is warning
only. (Life end error is not issued.)
This status is displayed when the
cover is Opened/Closed after the
Fuser Life error has been issued.
If the Print CONTINUE mode at
fuser life end (not disclosed to user)
has been set to ON, this warning is
displayed instead of the fuser life end
error.
Replace the
fuser with the
new fuser.
Panel display
(The mark indicates no
message in the upper row.)
ON
LINE
lamp
Inspection
lamp
Details
Remedial
measure
Replace the belt.
Varies
On
Indicates that the transfer belt
has reached end of life (warning).
Warning only. (Life end error is not
issued.)
This status is displayed when the
cover is Opened/Closed after the
transfer belt has reached end of life.
If the mode of Print CONTINUE
at the transfer belt life end (not
disclosed to user) has been set to
ON, this status is issued instead of
the transfer belt life end error.
Replace the
belt unit with
the new belt
unit.
%COLOR% The
printer runs out of
toner.
Varies
On
Indicates that the printer runs out of
toner.
This status (warning) is issued when
the cover is Opened/Closed once
after the error is issued to recover
the printer once.
If the mode of Print CONTINUE at
the toner run-out (not disclosed to
user) has been set to ON, this status
is issued instead of the toner run-out
error.
%COLOR%
Y
M
C
K
Replace
the toner
cartridge with
the new toner
cartridge.
%COLOR% The
toner cartridge is not
installed in the printer.
Varies
On
Indicates that the toner cartridge is
not installed. This status is warning
only.
%COLOR%
Y
M
C
K
Install
the toner
cartridge. Be
careful that
the toner
cartridge
supplied with
the product
cannot
be used if
the toner
cartridge of
other supply
is used.
Содержание C710
Страница 1: ...Maintenance Manual 072710C C710 MPS710...