43856301TH Rev.3
112 /
Oki Data CONFIDENTIAL
5. Maintenance Menu
5.3.1.12 LED head serial number display
This self-diagnostic menu item is used to check whether the downloaded LED head data
matches the serial number of the actual LED head.
1. Enter the self-diagnostic mode (level 1) and press the MENU+, MENU- key
until "SWITCH SCAN" is displayed in the upper row of the display area.
(Pressing the MENU+ key increments the test item and pressing the MENU- key
decrements the test item.)
2. When the MENU+ key or the MENU- key is pressed, serial numbers of the K/Y/
M/C LED head data are displayed in order.
3. Pressing the BACK key terminates the test. (Returns to the status of step 1.)
K ** ** ** ****
xxxxxxxxxxxxx
** ** ** ****: Rev number
Xxxxxxxxxxxxxxxx: serial number
5.3.1.13 NVRAM parameter setting
Do not use this menu item.
5.3.2 Various prints with the printer as a standalone unit
Menu map print
Information of the program version number and that of the control block configuration are
printed out.
Operation:
While the system is in the [ON LINE] state, press the ENTER key once to
display [Information menu].
Press the ENTER key to display [Menu map print/execute].
Press the ENTER key.
Network information print
Operation:
While the system is in the [ON LINE] state, press the ENTER key once to
display [Information menu].
Press the ENTER key.
Press the MENU+ key several times to display [Network/execute].
Press the ENTER key.
Alternately, press 5seconds the push switch located near the network connector
on the back of printer.
Demo print
Prints the demo patterns of the various destinations that are saved in the ROM.
Operation:
While the system is in the [ON LINE] state, press the ENTER key once to
display [Information menu].
Press the ENTER key.
Press the MENU+ key several times to display [DEMO1/execute].
Press the ENTER key.
Содержание C710
Страница 1: ...Maintenance Manual 072710C C710 MPS710...
