Ohmeda Giraffe OmniBed, Руководство оператора

Страница: 51 / 54

A-1
6600-0342-000 08/08/01
A-1
Appendix
Specifications
Power Requirements Accessory Outlets
10.5A @ 100v ~, 50/60 Hz 2A @ 100v ~, 50/60 Hz
9A @ 115v ~, 50/60 Hz 2A @ 115v ~, 50/60 Hz
4.5A @ 220v ~, 50/60 Hz 1A @ 220v ~, 50/60 Hz
4.5A @ 230v ~, 50/60 Hz 1A @ 230v ~, 50/60 Hz
4.5A @ 240v ~, 50/60 Hz 1A @ 240v ~, 50/60 Hz
Standards
Designed to meet requirements of
IEC 601-2-19 (Amendment 1)
IEC 601-2-21 (Amendment 1)
IEC 601-1
IEC 601-1-2
Operating Environment
Temperature 20 to 30°C
Humidity 10 to 95% Non-condensing relative humidity
Storage Conditions
Temperature -25 to 60°C
Humidity 10 to 95% Non-condensing relative humidity
Pressure 50 to 106 kPa
User Control Settings
Patient control temperature 35-37.5°C in 0.1° increments
Air control temperature 20-39°C in 0.1 increments
Radiant heat power 0-100% in 5% increments
Humidity
Servo- % relative humidity 30-95% in 5% increments
Manual- increments 1-10
Alarms
High Air Temp 1.5°C over AST (air set temperature)
Low Air Temp 3.0°C under AST
Baby Hot 1.0°C* over BST (baby set temperature)
Baby Cold 1.0°C* under BST
Fan Failure Failure of blower system
Air Temp >38°C >38°C for AST <37°C
Air Temp >40°C >40°C air temperature for AST >37°C
Air Probe Failure Compartment air probe failure
Air Probe Disconnect Disconnection of compartment air probe
Power failure Power switch on but no power
System failure Non-recoverable system failure
Add Water Humidifier water level low
Scale
Weight Exceeds Maximum Greater than 8kg load (visual only)
Scale Failure Detectable system failure (visual only)
* Can be re-set on the Service screen to 0.5°C