Ohmeda Giraffe OmniBed, Руководство оператора

Страница: 46 / 54

4-6
6600-0342-000 08/08/01
4-6
Maintaining the OmniBed
• Disposable probes come with a smaller heat reflecting
patch already attached, are white and have no metal
disk at the patient end.
Note: Disposable skin temperature probes cannot be
cleaned.
2. Clean the reusable patient temperature probe by gently
wiping with a soft damp cloth containing a disinfecting agent
safe for use on the probe materials. Always be sure to wipe
dry all cleaning agents after cleaning.
The following lists some cleaning solutions that may be used
safely on the reusable probe:
Generic Formulation Maximum Concentration Level
Sodium Hypochlorite (bleach) 0.5% Aqueous Solution
Glutaraldehyde 2%
Hydrogen Peroxide 6%
Iodophor Solution 0.27%
Cavicide® 100% spray
CAUTIONS
w
Use of cleaning/disinfecting solutions
containing chemicals not listed above
(i.e. alcohol, acetone, etc.), or chemicals
in greater concentrations than those
listed above, may damage the probe.
Cleaning other components
CAUTIONS
w
Do not clean the OmniBed with organic
solvents, scouring compounds, strong
acids, or strong bases. These com-
pounds may damage components.
w
To minimize the generation of static
electricity, do not polish the canopy and
doors with a dry cloth.
w
Do not autoclave or gas sterilize any of
the plastic parts.
Divide the components according to cleaning methods. Methods
other then those detailed in this section may damage the unit.
Always be sure to wipe dry all cleaning agents after cleaning.
Do not clean the radiant heating element or protective cover
inside the canopy doors.
Apply the cleaning solutions with a clean cloth or sponge. Dry
the parts with a clean damp soft cloth to avoid scratches.