OHD Quantifit2, Руководство пользователя

Страница: 7 / 76

7
Chapter 1 | Introduction |
1
Introduction
QuantiFit2 & OHD Logic Software
© All rights reserved. No parts of this work may be reproduced in any form or by any means -
graphic, electronic, or mechanical, including photocopying, recording, taping, or information
storage and retrieval systems - without the written permission of the publisher. OHD provides
this electronic copy which may be printed only for our customer’s use.
Products that are referred to in this document may be either trademarks and/or registered
trademarks of the respective owners. The publisher and the author make no claim to these
trademarks.
While every precaution has been taken in the preparation of this document, the publisher and
the author assume no responsibility for errors or omissions, or for damages resulting from the
use of information contained in this document or from the use of programs and source code
that may accompany it. In no event shall the publisher and the author be liable for any loss of
profit or any other commercial damage caused or alleged to have been caused directly or
indirectly by this document.
For further information, please contact the manufacturer:
OHD, LLLP
2687 John Hawkins Pkwy | Hoover, AL 35244 | U.S.A
+1.205.980.0180 |
www.ohdglobal.com
sales@ohdglobal.com | techsupport@ohdglobal.com
VERSION 1.52 12-15-2020
Welcome
The QuantiFit2 can be used with or without OHD Logic software. When testing without a
computer, all reports and test data may be retrieved from the instrument. Or, at a later time,
data can be imported into Logic software (when Logic and the QuantiFit2 have been set up for
merging or synchronizing data). The instrument is not compatible with FitTrack Gold, which
comes with the original Quantifit. However, the data from FitTrack Gold can be imported into
OHD Logic software.
This instrument portion of the manual will contain instructions for using the instrument without
the software.
CAUTION: If you plan to synchronize or merge data to a computer database, it is
imperative that you first set up Logic software and transfer the test subjects and other
information into the QuantiFit2.
Please see the software section of this manual for
assistance and instruction.
36