OHD Quantifit2, Руководство пользователя

Страница: 20 / 76

20
Chapter 4 | Startup Wizard |
4
Startup Wizard
Operator
o
For every test performed on the QuantiFit2, an operator must be assigned to the record.
o
The Operator screen is used to add/edit
operators in the database.
o
Enter one or more operator. Additional
operators may be added in the Instrument
Setup section.
See Setup Operators for
more information.
Daily Verification Check Wizard
o
This section will guide the operator through the procedure of doing a daily verification
check on the instrument.
o
This must be performed every day of testing.
o
Upon starting the instrument each day, the Daily
Verification screen will appear.
o
See the Daily Verification section of this
manual for more information.
People/Test
o
After the instrument check has been
performed, the wizard will move on to the
People screen.
o
People can be added one by one, imported
from a list, or added at the time of a
test. CAUTION: If the QuantiFit2 data is
to be synchronized or merged with the
database in Logic software, the list of names
must first be transferred into the QuantiFit2 from the software. See instructions in the
software setup section .
o
The people screen is the last screen in the setup wizard. The operator may close this
window or perform fit tests. See
6 Performing a Test instructions in this manual.
Navigation
The QuantiFit2 is operated by the color display on the front of the instrument.
When pressing any button, there will be a “click-tone.” The volume of this tone can be changed
in the System Settings menu.
33
18
36
26