OHD Quantifit2, Руководство пользователя

Страница: 32 / 76

32
Chapter 9 | Settings | System Settings
9
Settings
Auto Advance Time allows the operator to set the time given before the test step advances to
the next step when the auto advance function is turned on.
Redon Delay is the number of seconds to delay the QuantiFit2 while the test subject redons
the respirator so that auto start is not analyzing samples while the redon is taking place.
Signature Capture allows the operator to turn off the signature capture at the end of each test
if the signatures are not necessary or required.
System Info
The information button will display helpful information when contacting OHD for support .
o
System Version – The current version of on-board software
o
Cycle Count – The number of cycles the instrument has run
o
Calibration Due Date – The date due for annual calibration requirements
o
Current Date – Can be changed by touching the current value
o
Current Time – Can be changed by touching the current value
Setup Respirators
The QuantiFit2 is populated with an extensive list of
respirators.
When selecting respirators, only those turned "on"
will be available as a selection on the Test
Information screen during a fit test.
If the respirator that is being tested does not
appear on this list, a new respirator may be added
to the list. The following fields will be required:
o
Respirator manufacturer and model
o
Half or full face
o
Parameter or type or how mask is used
o
An image can be uploaded into the database
from a thumb drive.
·
When no image is uploaded, “No Image
Available” will be shown in place of the
image.
·
The respirator image should be no larger than 240 pixels wide by 370 pixels tall.
·
The respirator image should be a *.png file.