OETIKER EPC 01, Инструкция по эксплуатации, Страница: 93 / 98

93 www.oetiker.com
OETIKER EPC 01
aPPenDIX
Issue 11.22 08905306
Offset Length
[Byte]
Bit
Offset Type Data Description
40 4 float Holding/detecting ac-
tual closure gap Measured gap during the holding or detecting
function at the time of the last closure.
44 2 Int Holding/detecting clo-
sure force setpoint Target force during the holding or detecting func-
tion at the time of the last closure.
46 2 Int Holding/detecting clo-
sure force tolerance (-) negative tolerance of the target force during the
holding or detecting function at the time of the
last closure.
48 2 Int Holding/detecting clo-
sure force tolerance (+) Positive tolerance of the target force during the
holding or detecting function at the time of the
last closure.
50 2 Int Holding/detecting ac-
tual closure force Measured force during the holding or detecting
function at the time of the last closure.
52 2 Int Holding/detecting
result Result of the holding/detecting work step. oK =
0, not oK = error number.
54 4 float Contact actual closure
gap Measured force during the contact function at the
time of the last closure.
58 2 Int Contact closure force
setpoint Target gap during the contact function at the time
of the last closure.
60 2 Int actual closure force Measured force during contact function in last
closure.
62 4 float Closure gap setpoint at
closing Target gap during the holding or detecting func-
tion at the time of the last closure.
66 4 float Closure gap at closing
tolerance (-) negative tolerance of the target gap during the
closing function at the time of the last closure.
70 4 float Closure gap at closing
tolerance (+) Positive tolerance of the target gap during the
closing function at the time of the last closure.
74 4 float actual closure gap at
closing Measured gap during the closing function at the
time of the last closure.
78 2 Int Closure force at closing
setpoint Target force during the closing function at the
time of the last closure.
80 2 Int Closure force at closing
tolerance (-) negative tolerance of the target force during the
closing function at the time of the last closure.
82 2 Int Closure force at closing
tolerance (+) Positive tolerance of the target force during the
closing function at the time of the last closure.
84 2 Int actual closure force at
closing Measured force during the closing function at the
time of the last closure.
86 2 Int Closure Result Result of the closing work step. oK = 0, not oK =
error number.
88 4 float Closure gap setpoint at
verification Target gap during the verification function at the
time of the last closure.
92 4 float Closure gap setpoint at
verification tolerance (-) negative tolerance of the target gap during the
verification function at the time of the last closure.
96 4 float Closure gap setpoint at
verification (+) Positive tolerance of the target gap during the
verification function at the time of the last closure.
100 4 float actual closure gap at
verification Measured gap during the verification function at
the time of the last closure.
104 2 Int Closure force at verifi-
cation setpoint Target force during the verification function at the
time of the last closure.
106 2 Int Closure force at verifi-
cation tolerance (-) negative tolerance of the target force during the
verification function at the time of the last closure.
108 2 Int Closure force at verifi-
cation (+) Positive tolerance of the target force during the
verification function at the time of the last closure.
110 2 Int actual closure force at
verification Measured force during the verification function at
the time of the last closure.