manualshive.com logo in svg

OETIKER EPC 01, Инструкция по эксплуатации, Страница: 65 / 98

Поделиться
Скачать
OETIKER EPC 01 Скачать руководство пользователя страница 65

65

www.oetiker.com

OETIKER EPC 01

MaInTenanCe anD RePaIR

Issue 11.22

08905306

NOTICE

each pincer body is compatible with different pincer heads. The type designations can be found 
in the tool catalog.

Scope of supply of a pincer head set

• 

lip seal (1)

• 

Piston guide band with wedge piston (2)

• 

Compression spring (3)

• 

Plunger (4)

• 

spacer washer, usually only included in the scope of 
delivery in special versions (5)

• 

Pincer head (6)

 Changing the pincer head

1.  Disconnect the compressed air supply  

and switch off the Control Unit.

2.  Detach the pincer unit from the Control Unit.
3.  separate the pincer head (9) from the pincer body (1):

 

–

Undo the locknut (2).

 

–

Undo the union nut (8).

4.  Remove the plunger (6), plunger piston (5), piston guide 

band (4), lip seal (3) with compression spring (7) from the 
pincer body (1).

5.  lubricate the plunger piston (5) together with the plung-

er (6), piston guide band (4) and lip seal (3) from the 
new pincer head set with the recommended lubricant 
(

see chapter 13.1.6

).

6.  Insert the lubricated unit into the pincer body (1).
7.  Mount the compression spring (7) on the plunger (6).
8.  fully screw in the lock nut (2).
9.  screw the pincer head (9) on to the pincer body (1).
10.  align the pincer head (9) on the plunger (6) and tighten the union nut (8) hand-tight so that the pincer head 

can be rotated only with difficulty.

11.  Tighten the lock nut (2) against the union nut (8).

1

2

3

5

4

6

Fig  48:     

Pincer head set

1

2

3

4

6

7

8

9

5

Содержание EPC 01



































































































Отзывы:

Нет отзывов