manualshive.com logo in svg

OETIKER EPC 01, Инструкция по эксплуатации, Страница: 76 / 98

Поделиться
Скачать
OETIKER EPC 01 Скачать руководство пользователя страница 76

76

www.oetiker.com

OETIKER EPC 01

TRoUblesHooTInG anD eRRoR MessaGes

Issue 11.22

08905306

Error message

Cause of the error

Troubleshooting measures

PE7008

The verification force was outside the 
tolerance range:
• 

The verification force tolerance 
chosen was set too tight

• 

selected verification force too 
low

• 

excessive friction in the system 
(pincer and pincer head)

Perform actions in the following sequence until the 
error is eliminated:

 

►

Proceed with the pincer test.

 

►

Check the verification force tolerance and in-
crease it if necessary.

 

►

Increase the verification force, but do not exceed 
500 n.

 

►

send in the pincer and have it serviced.

PE7009

The verification value was outside 
the tolerance range:
• 

Clamp not hooked in or locked

• 

The pincer slipped off the clamp 
during the verification function

• 

The verification gap tolerance 
was set too tight

• 

excessive friction in the system 
(pincer and pincer head)

Perform actions in the following sequence until the 
error is eliminated:

 

►

Check the clamp engagement and repeat the 
closure with a new clamp.

 

►

Proceed with the pincer test.

 

►

Check the verification gap tolerance and increase 
it if necessary.

 

►

send in the pincer and for servicing.

PE7010

Verification force and verification val-
ue were outside the tolerance range: 
• 

Pincer jaws have not verified on 
the closing mechanism (pincer 
was removed before verification)

• 

The verification force was set 
too low

• 

The verification force tolerance 
chosen was set too tight

• 

The verification gap tolerance 
was set too tight

Perform actions in the following sequence until the 
error is eliminated:

 

►

Check the insertion of the clamp.

 

►

Proceed with the pincer test.

 

►

Check the verification force and increase it if nec-
essary, but do not exceed 500 n.

 

►

Check the verification force tolerance and in-
crease it if necessary.

 

►

Check the verification value tolerance and in-
crease it if necessary.

 

►

send in the pincer and have it serviced.

PE7011

Clamp snap-in not detected:
• 

The clamp did not travel past the 
hook

• 

The clamp snapped in outside 
the closing gap tolerance win-
dow

• 

The snapping force was too 
weak to be detected

Perform actions in the following sequence until the 
error is eliminated:

 

►

Check the closure gap tolerance and increase it if 
necessary.

 

►

Check the type of clamp.

 

►

Check the snap Detection speed Threshold  
(contact local oeTIKeR service Center).

PE7012

Pincer test canceled by user

 

►

Repeat the pincer test.

PE7013

Pincer does not move to the open 
starting position:
• 

The friction in the pincer is too 
great

• 

exhaust air vents blocked.

• 

Incorrect initial position due to 
error 

PE7015

Perform actions in the following sequence until the 
error is eliminated:

 

►

Proceed with the pincer test.

 

►

Clean the exhaust air vents.

 

►

send in the pincer and have it serviced.

Содержание EPC 01



































































































Отзывы:

Нет отзывов