manualshive.com logo in svg

OETIKER EPC 01, Инструкция по эксплуатации, Страница: 9 / 98

Поделиться
Скачать
OETIKER EPC 01 Скачать руководство пользователя страница 9

9

www.oetiker.com

OETIKER EPC 01

basIC safeTy InsTRUCTIons

Issue 11.22

08905306

2 5  Safe working methods

 

►

before each start of production, check the ePC 01 for visible damage and ensure that it is operated only 
when in perfect condition. 

 

►

Report deficiencies to the supervisor immediately. 

 

–

Do not attempt to continue using the ePC 01 if defects have been identified.

 

►

Wear safety glasses and safety shoes during operation and maintenance. Wear a safety helmet when working 
overhead.

 

►

The ePC 01 is designed for operation by a single operator: The closure cycle must never be initiated by 
a second person.

 

►

Keep sufficient space around the product. Users must not be obstructed by third parties.

 

►

set up the workstation ergonomically for working with the ePC 01. In particular, this includes the following:

 

–

ensure lighting intensity of at least 400 lux.

 

–

enable safe and comfortable posture during operation.

 

–

set up and lay plant components, hoses and pipes in such a way that they cannot cause any tripping 
or falling hazards during operation.

 

►

When working with the ePC 01, the hands, arms, shoulders and neck can be stressed. Pain and discomfort 
can be the result.

 

–

Interrupt work with the ePC 01 at regular intervals.

 

–

stop work if symptoms of stress persist or recur. Have stress symptoms medically checked.

2 6  Safety devices

safety devices protect against hazards when handling the ePC 01.

 

►

Do not modify the safety devices.

 

►

ensure that all safety devices are effective during operation.

2 6 1  Pressure relief valve

one or more pressure relief valves are installed in the service unit, to protect against excessive pressure. The 
valves are arranged in such a way that they limit the pressure in all relevant system parts and equipment. alterna-
tive devices, such as pressure regulators, may be used provided they meet the requirement of the application.

2 6 2  Safety shut-off valve

a safety shut-off valve is installed in the compressed air supply line in the area of the compressed air filter. In the 
event of excessive pressure, the safety shut-off valve closes and shuts off the compressed air supply line to the 
downstream plant components and equipment.

2 6 3  Safety lever

There is a safety lever on the Trigger Unit of the pincer. The safety lever is pressed and held down during the 
crimping process. The safety lever actuates the integrated 3/2 safety valve. The safety valve is designed to close 
independently under pressure and to vent safely. 
actuating the safety lever prevents unintentional closure.

Содержание EPC 01



































































































Отзывы:

Нет отзывов