manualshive.com logo in svg

OETIKER EPC 01, Инструкция по эксплуатации, Страница: 64 / 98

Поделиться
Скачать
OETIKER EPC 01 Скачать руководство пользователя страница 64

64

www.oetiker.com

OETIKER EPC 01

MaInTenanCe anD RePaIR

Issue 11.22

08905306

10 3 3 Checking and changing the pre-filter

Inspect the pre-filter at regular intervals for soiling and replace if necessary

Recommended filters, pre-filters and accessories:

Designation

Manufacturer, type

Part no 

filter 

oeTIKeR, standard filter with sieve function ≤ 5μ

05005930

filter

fesTo, Type Ms4-lf-1/4-C-R-V

529 397

Pre-filter (for heavily polluted air)

fesTo, Type Ms6-lf-1/4-e-R-V

527 668

bracket for fesTo filter

fesTo, Ms4-Wb or Ms6-Wb

–

 

9

Maintenance prepared.

1.  Check the pre-filter for contamination.
2.  Change the pre-filter in the event of contamination. Install the new pre-filter vertically to ensure proper opera-

tion.

3.  Completion of maintenance (

see chapter 10.2.2

).

10 3 4 Have the pincer and pincer head serviced (recommended)

oeTIKeR recommends that the pincer and the pincer head are sent to the local oeTIKeR service Center 
(

see chapter 14

) for servicing after the specified interval. 

a counter is integrated in the Trigger Unit of the clamp, which after 250,000 closures issues a warning to the Con-
trol Unit that maintenance is due.

 

9

Maintenance prepared.

1.  Disassemble the pincer and pincer head, send them in and have them serviced.
2.  after maintenance, install the pincer and pincer head.
3.  Completion of maintenance (

see chapter 10.2.2

).

10 4  Repair

10 4 1 Changing the pincer head

WARNING

Risk of injury when the pincer head is not mounted!

starting a closure can cause the compression spring and plunger to fly apart if the pincer head is 
not mounted.

 

►

never operate the pneumatic pincer unless the pincer head is mounted.

 

►

Change the pincer head only when the power supply and compressed air supply are discon-
nected.

Содержание EPC 01



































































































Отзывы:

Нет отзывов