Oerlikon CITOTIG 315, Руководство оператора

Страница: 29 / 429

English 25 English
Arc Time & Arc Counter
These two options show to the welder the total working
hours and the total numeber of arc striking.
To reset one or both register, performe the follow
procedure:

Select the option to reset;

Push SEL button for 5s. After that time the
counter is reset: 0.0 presents in Voltage displays

Release SEL Button
UI & CTRL firmware revision
By this option is possible to see the current software
revision in both UI and control board.
RESET
By this option an end user can reset all the settings
present in the machine to factory default indicated in this
manual for all parameters. Memory locations are not
affected by this reset.
Maintenance
WARNING
For any maintenance or repair operations it is
recommended to contact the nearest technical service
center or Oerlikon. Maintenance or repairs performed by
unauthorized service centers or personnel will null and
void the manufacturers warranty.
The frequency of the maintenance operations may vary
in accordance with the working environment. Any
noticeable damage should be reported immediately.

Check cables and connections integrity. Replace, if
necessary.

Keep clean the machine. Use a soft dry cloth to
clean the external case, especially the airflow inlet /
outlet louvers.
WARNING
Do not open this machine and do not introduce anything
into its openings. Power supply must be disconnected
from the machine before each maintenance and service.
After each repair, perform proper tests to ensure safety.
Customer Assistance Policy
The business of The Lincoln Electric Company is
manufacturing and selling high quality welding
equipment, consumables, and cutting equipment. Our
challenge is to meet the needs of our customers and to
exceed their expectations. On occasion, purchasers may
ask Lincoln Electric for advice or information about their
use of our products. We respond to our customers
based on the best information in our possession at that
time. Lincoln Electric is not in a position to warrant or
guarantee such advice, and assumes no liability, with
respect to such information or advice. We expressly
disclaim any warranty of any kind, including any
warranty of fitness for any customer’s particular purpose,
with respect to such information or advice. As a matter of
practical consideration, we also cannot assume any
responsibility for updating or correcting any such
information or advice once it has been given, nor does
the provision of information or advice create, expand or
alter any warranty with respect to the sale of our
products
Lincoln Electric is a responsive manufacturer, but the
selection and use of specific products sold by Lincoln
Electric is solely within the control of, and remains the
sole responsibility of the customer. Many variables
beyond the control of Lincoln Electric affect the results
obtained in applying these types of fabrication methods
and service requirements.
Subject to Change – This information is accurate to the
best of our knowledge at the time of printing. Please
refer to
www.oerlikon-welding.com for any updated
information.