Reference/System
Series
TOYOTA Tacoma
Procedure
Issue C 09/15/19
Page | 27
i. Connect the power wire to the fuse holder by
inserting the 10-gauge stripped power wire into the
yellow butt connector and crimp.
(Fig. 12-10)
j. Crimp the yellow butt connector.
(Fig. 12-11)
k. Apply heat to activate the solder and heat shrink
insulator for the best connection possible.
(Fig. 12-
12)
a. Remove the 12mm bolt from the battery’s positive
terminal.
(Fig. 12-13)
Fig. 12-12
Fig. 12-13
Fig. 12-10
Fig. 12-11
