manualshive.com logo in svg

OEM Audio Reference Series, Руководство пользователя

Поделиться
Скачать
OEM Audio Reference Series Скачать руководство пользователя страница 2

Reference/System

 Series

TOYOTA    Tacoma

Issue A 09/15/15

Page | 2

Preparation

Table of Contents

 

I. Preparation...................................................................................................1-2

 

 

1. Table of Contents...................................................................................2

 

II. Procedure 

 

 

1. Vehicle Preparation.................................................................................3

 

 

2. Front Door Speaker Installation..............................................................3-6

 

 

3. Rear Door Speaker Installation...............................................................6-8

 

 

4. Prepping for Subwoofer Umbilical Run....................................................8-9

 

 

5. Subwoofer Installation.........................................................................9-12

 

 

6. Ampli

fi

er Installation.........................................................................12-14

 

 

7. Finalizing Subwoofer Umbilical Run.....................................................14-15

 

 

8. Quick-Sync Wiring Harness Install......................................................16-20

 

 

9. Radio Removal................................................................................20-21

 

 

10. Quick-Sync Wiring Harness Continued...............................................21-22

 

 

11. Power Wire Installation..................................................................22-25

 

 

12. Installation of the Fuse Holder.........................................................25-26

Accessory Installation Practice (read before installation)

Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. 

The installation of this accessory should follow approved guidelines to ensure a quality installation.

These guidelines can be found in the “Accessory Installation Practices” document.

This document cover such items as:

 

• Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.)

 

• Safety (eye protection, checking torque procedure, etc.)

 

• Vehicle Disassembly/Reassembly (panel removal, part storage, etc.)

 

• Electrical Component Disassembly/Reassembly (battery disconnection, connector removal,  

 

etc.)

 

Please see your Toyota/Scion/Lexus dealer for a copy of this document.

Revisions and other installation assets

OEM Audio Plus is committed to providing components and instructions designed for seamless 

integration. Please visit oemaudioplus.com for the most up to date installation related documents 

and media.

Important Warranty Information

Failure to completely and properly Warranty Registration may result in possible reduction or 

complete denial of future warranty claims. Complete yours today at oemaudioplus.com/registration 

or call: 855 OEM ODIO for more details and alternative methods of system registration.

Содержание Reference Series






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды