Reference/System
Series
TOYOTA Tacoma
Procedure
Issue A 09/15/15
Page | 17
5. Leave about 6-10 inches of slack for the
white, gray and black connectors from the carpet
opening.
(Fig. 8-6)
6. Locate the factory ground underneath the
carpet and remove the 10mm ground bolt.
(Fig. 8-7)
7. Install the harness ground together with
the factory ground and re-install the 10mm
bolt.
Note: Make sure harness ground terminal
rests on top of the factory ground terminal.
(Fig. 8-8, 8-9)
Fig. 8-5
Fig. 8-7
Fig. 8-6
Fig. 8-8
Socket 10mm
