Reference/System
Series
TOYOTA Tacoma
Procedure
Issue C 09/15/19
Page | 26
d. Run the length of the wire through the grommet.
You’ll want just enough length to reach your battery.
Cut any additional slack.
(Fig. 12-6)
e. Install supplied high-temp corrugated split loom
to cover the power wires and insulate against
extreme temperature under the hood.
(Fig. 12-7)
f. Run loomed power wire toward the battery.
Secure using cable ties as necessary.
(Fig. 12-8)
* For our DSP Power Ampli
fi
er, you will be using the
power wire labeled “A”.
The “B” power wire is used exclusively with our
Dedicated Subwoofer Ampli
fi
er, as found in our Dual
Subwoofer option.
h. Use a wire stripper to strip 3/8” off the end of
each power wire.
(Fig. 12-9)
Fig. 12-7
Fig. 12-8
To battery
Fig. 12-9
Fig. 12-6
