Reference/System
Series
TOYOTA Tacoma
Procedure
Issue A 09/15/15
Page | 4
Fig. 2-5
Fig. 2-6
Fig. 2-7
Fig. 2-8
4. Disconnect window/door lock control
connectors from the panel. Use of a pick tool
or precision screwdriver is needed to release
connector.
(Fig. 2-5)
5. Use a pick tool to remove the cover behind the
interior door latch.
(Fig. 2-6)
6. Remove #2 Phillips screw behind the
door latch.
7. Use a pick tool to remove the cover below
door grab handle and remove the #2 Phillips
screw behind the cover.
8. Use panel tool to disengage the clips behind
the door panel one at a time. Start at the
bottom, then the sides, and
fi
nish at the top.
Use gentle force to remove door panel.
(Fig. 2-7)
10. Set door panel aside.
b. Install 6x9 speaker
1. Disconnect the 6x9 speaker connector.
(Fig. 2-8)
Pick Tool
Pick Tool
Panel Tool
