Reference/System
Series
TOYOTA Tacoma
Procedure
Issue A 09/15/15
Page | 15
b. Unfasten white plastic carpet clips along the
threshold area and lift carpet edge to expose cable
route.
(Fig. 7-3)
c. Run the cable under the carpet and exit under the
seat through the opening used by the existing factory
wiring - pull about 12 inches of slack.
(Fig. 7-4)
d. Reinstall the rear weather stripping, drivers
side seat belt trim and rear threshold panel.
(Fig. 7-5, 7-6)
Fig. 7-3
Fig. 7-5
Fig. 7-4
Fig. 7-6
