Reference/System
Series
TOYOTA Tacoma
Procedure
Issue A 09/15/15
Page | 3
Fig. 2-1
Door Nomenclature
A Panel
Door Latch
Grab Handle
Window/Door
Lock Panel
Fig. 2-2
Fig. 2-3
Fig. 2-4
Panel Tool
1. Vehicle Preparation
a. Apply parking brake.
b. Open the trunk and hood of the vehicle.
c. Disconnect the negative (-) battery cable.
d. Prepare a protective surface to place all vehicle
components on.
**Section 2 is for Reference 400CF Only**
2. Front Door Speaker Installation
a. Remove Door Panels
1. Remove A Pillar by pulling straight and away
from door
(Fig. 2-1). Disengage any clips that
remain in the door and return to the A Pillar
panel.
(Fig. 2-2)
2. Disengage door locking tab.
(Fig. 2-3)
3. Use a panel tool to remove the window/door
lock control panel.
Note: Insert tool between the
front edge of the panel of the trim to remove.
(Fig. 2-4)
