Oce WP36/50, Руководство по эксплуатации

Страница: 75 / 115

Chapter 3 Using the Operator Panel
3-54
Press the or key repeatedly until
>>Staple
appears.
Press the
ENTER
key. A blinking question mark (
?
)
appears.
Press the or key to change
Off
to
On
.
Press the
ENTER
key.
To exit the menu selection, press the
MENU
key.
Punch Error Detection Setting
This setting is possible only when the Punch Unit is in-
stalled on the optional finisher unit. This setting controls
whether or not the message
Chad box full
appears when
the chad box on the punch unit becomes full.
Press the
MENU
key.
Press the or key repeatedly until
Others >
ap-
pears.
Press the key.
Press the or key repeatedly until
>
Finishing Error >
appears.
Press the key.
Press the or key repeatedly until
>>Punch
ap-
pears.
Press the
ENTER
key. A blinking question mark (
?
)
appears.
Press the or key to change Off to On.
Press the
ENTER
key.
To exit the menu selection, press the
MENU
key.
Service Menu
The service menu contains maintenance operations to be
performed by service personnel. The
Print Status Page
,
Developer
, and
Drum
menus appear; however, in general,
you will only need to use the
Print Status Page
menus.
Printing the Service Status Page
The service status page contains printer settings information
that is more detailed than the standard status page and is
therefore for mostly service purposes. To print a service sta-
tus page, proceed as follows;
Press the
MENU
key.
Press the or key repeatedly until
Others >
ap-
pears.
Press the key.
Press the or key repeatedly until
>Service >
appears.
Press the key.
>>Staple
OFF
>>Staple
? Off
On
Message is displayed and printing pauses.
Printing resumes automatically when the
chad box is emptied and replaced back into the
punch unit.
Off
Message is displayed, but printing continues
without punching.
Others >
>Finishing >
Error
6
7
8
9
10
1
2
3
4
5
>>Punch
OFF
>>Punch
? Off
Others >
>Service >
6
7
8
9
10
1
2
3
4
5