Oce WP36/50, Руководство по эксплуатации

Страница: 67 / 115

Chapter 3 Using the Operator Panel
3-46
Press the
MENU
key.
Press the or key repeatedly until
Paper
Handling >
appears.
Press the key.
>Stitch Adjust >
appears.
Press the key.
>>A4/Letter
appears.
Press the or key to select
A4/Letter
,
B4
or
A3/Ledger
.
When the desired paper size is displayed, press the
ENTER
key. A blinking cursor (
_
) appears under the value.
Press the or key to increase or decrease, respec-
tively, the value at the blinking cursor. Use the
and keys to move the cursor right and left.
Definable value:
-057
to
057
When the desired value is displayed, press the
ENTER
key.
Press the
MENU
key. The message display returns to
Ready
.
Overriding A4 and Letter Size Difference
This selects whether to enable or disable the difference be-
tween A4 size and Letter size. Under the default setting of
Off
, the paper size of the paper source is matched to the pa-
per size formatting the jobs. If these differ, a corresponding er-
ror message is displayed. When this is set to
On
, printing is
performed even if the actual paper size differs from the paper
size formatting the jobs.
Press the
MENU
key.
Press the or key repeatedly until
Paper
Handling >
appears.
Press the key.
Press the or key repeatedly until
>Override
A4/LT
appears.
Press the
ENTER
key. A blinking question mark (
?
)
appears.
Select
On
or
Off
using the or key.
Press the
ENTER
key.
Press the
MENU
key. The message display returns to
Ready
.
Customizing Paper Type
The following describes the procedure used to set a user-de-
fined paper type for the printer. Eight custom user settings
may be registered. After having been set, any of these may
be called up when setting the paper type for a paper source.
The paper weight and duplex path can be set (see
Setting the
Paper Weight on page 3-47
, and
Setting the Duplex Path on
page 3-47
) after selecting the paper type to be customized as
follows. For how to reset the customized settings, see
Resetting the Type Adjust on page 3-47
.
Press the
MENU
key.
Press the or key repeatedly until
Paper
Handling >
appears.
Press the key.
Press the or key repeatedly until
>Type
Adjust >
appears.
Paper Handling >
>Stitch Adjust >
>>A4/Letter
000
>>A4/Letter
000
Paper Handling >
1
2
3
4
5
6
7
8
9
1
2
>Override A4/LT
Off
>Override A4/LT
? Off
Paper Handling >
>Type Adjust >
Custom 1
3
4
5
6
7
8
1
2
3
4