Oce VarioPrint 2090, Руководство по эксплуатации функций

Страница: 20 / 128

16 Océ VarioPrint 2090 Job manual
F System information key
The key to open the 'System monitor' and the 'System manager'
(during normal operation the 'System monitor' is not on the screen).
The light next to the key indicates that the 'System information' is
active. To close the 'System information' view, either press
again
or press 'Close' (the rightmost key at the top of the screen).
The 'System monitor' includes the following items.
■
Message area for text messages.
■
Paper levels in each of the four paper trays.
■
Paper type information in each of the four paper trays:
- Size
- Special type (cover and special)
■
Warnings for low level of the supplies:
- Toner
- Staples in stapler 1
- Staples in stapler 2
- Staples in the off-line stapler
The 'System manager' displays the following items.
■
Access KOS or SAS.
■
Shutdown the system.
Note:
When the low toner level indicator is on, the 'Toner refilled'
key is active.
G Arrow keys
The 4 arrow keys are the key, the key, the key and the
key. You can use the keys to navigate through the mailbox or
to change values in the job editor. The functions for the arrow
keys are listed below.
■
Press to increase the value in minimum step size.
■
Press to decrease the value in minimum step size.
■
Press to increase the value in predefined steps.
■
Press to decrease the value in predefined steps.
H Stop key
The key to stop the active, current print job.
■
Press one time to stop the job after a complete set.
■
Press two times to stop the job as soon as possible, within a set.
Part Description