Oce VarioPrint 2070, Руководство пользователя

Страница: 164 / 224

Scan separate job parts
Introduction
You must create different job parts if the set of originals has more than one original type
‘Preparing the Scan Job’ on page 153 .
When starting a scan job with separate job parts, proceed as follows:
■
Prepare the first job part.
■
Enter the settings for the digital document.
■
Enter the settings for the first job part.
■
Press the combine key .
■
Prepare the next job part.
■
Enter the settings for the next job part.
■
Press the combine key .
■
Press the Start key .
Before you begin
■
Inspect the originals and make separate job parts ‘Preparing the Scan Job’ on page 153 .
Scanning separate job parts
1.
Collect the job parts.
2.
Place the originals of the first job part face down in the automatic document feeder or
on the platen.
Follow the feed direction according to the dimensions and orientation of the information
of the job part
‘Preparing the Scan Job’ on page 153 .
3.
Select the 'Scan' mode .
The 'Workflow' section automatically opens.
4.
Select a 'Scan profile' using the arrow keys ‘About the Scan Profiles’ on page 150 .
5.
Enter the settings for the digital document.
■
Activate the 'Digital document' section.
Make sure that the 'Page size' card is open.
■
Select the page size and the orientation in the 'Size' function box.
6.
Enter the settings for the job part.
■
Activate the 'Original' section.
■
Select '1-sided' or '2-sided' in the 'Original' function box.
■
Select the icon in the 'Original type' function box to define the orientation of the in-
formation and the binding edge of the originals
‘Preparing the Scan Job’ on page 153 .
7.
Press the combine key .
Chapter 4 - The Scan Function 164
Scan separate job parts