Troubleshooting If You Cannot Print as
E
xpected
4
3
Phenomenon
Cause
Corrective Action
Paper has been loaded
incorrectly, causing it to wrinkle.
Reload the paper.
The
Printhead
is set too low.
(→P.8)
When printing on
Heavyweight Coated
Paper
or other paper-based media,
choose a
VacuumStrngth
setting of
Strong
or
Strongest
. If paper still rubs
against the printhead, try raising the
Printhead
higher in
Head Height
, one
level at a time.
(→CD "Adjusting the Vacuum
Strength")
(→CD "Adjusting the Printhead Height")
(→P.12)
In
Head Height
, choose
Automatic
.
(→CD "Adjusting the Printhead
Height")
You are printing on heavyweight
paper or paper that curls or
wrinkles easily after absorbing
ink.
(→CD "Selecting the Paper Type
(Roll)")
Make sure the same paper type is
specified in the printer driver as on the
printer.
Paper rubs against the
Printhead
.
The paper type as specified
on the printer does not match
the type specified in the printer
driver.
Make sure the same type of paper is
specified on the printer as in the printer
driver.
Hold down the
Stop
button for a
second or more to cancel printing.
Change the paper type in the printer
driver and try printing again.
2.
1.
(→CD "Selecting the Paper Type
(Sheet)")
